What does “rep; nop;” mean in x86 assembly? Is it the same as the “pause” instruction

assemblycpumachine-codex86x86-64

What does rep; nop mean?
Is it the same as pause instruction?
Is it the same as rep nop (without the semi-colon)?
What's the difference to the simple nop instruction?
Does it behave differently on AMD and Intel processors?
(bonus) Where is the official documentation for these instructions?

Motivation for this question

After some discussion in the comments of another question, I realized that I don't know what rep; nop; means in x86 (or x86-64) assembly. And also I couldn't find a good explanation on the web.

I know that rep is a prefix that means "repeat the next instruction cx times" (or at least it was, in old 16-bit x86 assembly). According to this summary table at Wikipedia, it seems rep can only be used with movs, stos, cmps, lods, scas (but maybe this limitation was removed on newer processors). Thus, I would think rep nop (without semi-colon) would repeat a nop operation cx times.

However, after further searching, I got even more confused. It seems that rep; nop and pause map to the exactly same opcode, and pause has a bit different behavior than just nop. Some old mail from 2005 said different things:

"try not to burn too much power"
"it is equivalent to 'nop' just with 2 byte encoding."
"it is magic on intel. Its like 'nop but let the other HT sibling run'"
"it is pause on intel and fast padding on Athlon"

With these different opinions, I couldn't understand the correct meaning.

It's being used in Linux kernel (on both i386 and x86_64), together with this comment: /* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */ It is also being used in BeRTOS, with the same comment.

Best Answer

rep; nop is indeed the same as the pause instruction (opcode F390). It might be used for assemblers which don't support the pause instruction yet. On previous processors, this simply did nothing, just like nop but in two bytes. On new processors which support hyperthreading, it is used as a hint to the processor that you are executing a spinloop to increase performance. From Intel's instruction reference:

Improves the performance of spin-wait loops. When executing a “spin-wait loop,” a Pentium 4 or Intel Xeon processor suffers a severe performance penalty when exiting the loop because it detects a possible memory order violation. The PAUSE instruction provides a hint to the processor that the code sequence is a spin-wait loop. The processor uses this hint to avoid the memory order violation in most situations, which greatly improves processor performance. For this reason, it is recommended that a PAUSE instruction be placed in all spin-wait loops.

Warning:

If you decide to compile and run this, pay attention to your CPU temperatures!!!
Make sure you don't overheat it. And make sure CPU-throttling doesn't affect your results!

Furthermore, I take no responsibility for whatever damage that may result from running this code.

Notes:

This code is optimized for x64. x86 doesn't have enough registers for this to compile well.
This code has been tested to work well on Visual Studio 2010/2012 and GCC 4.6.
ICC 11 (Intel Compiler 11) surprisingly has trouble compiling it well.
These are for pre-FMA processors. In order to achieve peak FLOPS on Intel Haswell and AMD Bulldozer processors (and later), FMA (Fused Multiply Add) instructions will be needed. These are beyond the scope of this benchmark.

#include <emmintrin.h>
#include <omp.h>
#include <iostream>
using namespace std;

typedef unsigned long long uint64;

double test_dp_mac_SSE(double x,double y,uint64 iterations){
    register __m128d r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,rA,rB,rC,rD,rE,rF;

    //  Generate starting data.
    r0 = _mm_set1_pd(x);
    r1 = _mm_set1_pd(y);

    r8 = _mm_set1_pd(-0.0);

    r2 = _mm_xor_pd(r0,r8);
    r3 = _mm_or_pd(r0,r8);
    r4 = _mm_andnot_pd(r8,r0);
    r5 = _mm_mul_pd(r1,_mm_set1_pd(0.37796447300922722721));
    r6 = _mm_mul_pd(r1,_mm_set1_pd(0.24253562503633297352));
    r7 = _mm_mul_pd(r1,_mm_set1_pd(4.1231056256176605498));
    r8 = _mm_add_pd(r0,_mm_set1_pd(0.37796447300922722721));
    r9 = _mm_add_pd(r1,_mm_set1_pd(0.24253562503633297352));
    rA = _mm_sub_pd(r0,_mm_set1_pd(4.1231056256176605498));
    rB = _mm_sub_pd(r1,_mm_set1_pd(4.1231056256176605498));

    rC = _mm_set1_pd(1.4142135623730950488);
    rD = _mm_set1_pd(1.7320508075688772935);
    rE = _mm_set1_pd(0.57735026918962576451);
    rF = _mm_set1_pd(0.70710678118654752440);

    uint64 iMASK = 0x800fffffffffffffull;
    __m128d MASK = _mm_set1_pd(*(double*)&iMASK);
    __m128d vONE = _mm_set1_pd(1.0);

    uint64 c = 0;
    while (c < iterations){
        size_t i = 0;
        while (i < 1000){
            //  Here's the meat - the part that really matters.

            r0 = _mm_mul_pd(r0,rC);
            r1 = _mm_add_pd(r1,rD);
            r2 = _mm_mul_pd(r2,rE);
            r3 = _mm_sub_pd(r3,rF);
            r4 = _mm_mul_pd(r4,rC);
            r5 = _mm_add_pd(r5,rD);
            r6 = _mm_mul_pd(r6,rE);
            r7 = _mm_sub_pd(r7,rF);
            r8 = _mm_mul_pd(r8,rC);
            r9 = _mm_add_pd(r9,rD);
            rA = _mm_mul_pd(rA,rE);
            rB = _mm_sub_pd(rB,rF);

            r0 = _mm_add_pd(r0,rF);
            r1 = _mm_mul_pd(r1,rE);
            r2 = _mm_sub_pd(r2,rD);
            r3 = _mm_mul_pd(r3,rC);
            r4 = _mm_add_pd(r4,rF);
            r5 = _mm_mul_pd(r5,rE);
            r6 = _mm_sub_pd(r6,rD);
            r7 = _mm_mul_pd(r7,rC);
            r8 = _mm_add_pd(r8,rF);
            r9 = _mm_mul_pd(r9,rE);
            rA = _mm_sub_pd(rA,rD);
            rB = _mm_mul_pd(rB,rC);

            r0 = _mm_mul_pd(r0,rC);
            r1 = _mm_add_pd(r1,rD);
            r2 = _mm_mul_pd(r2,rE);
            r3 = _mm_sub_pd(r3,rF);
            r4 = _mm_mul_pd(r4,rC);
            r5 = _mm_add_pd(r5,rD);
            r6 = _mm_mul_pd(r6,rE);
            r7 = _mm_sub_pd(r7,rF);
            r8 = _mm_mul_pd(r8,rC);
            r9 = _mm_add_pd(r9,rD);
            rA = _mm_mul_pd(rA,rE);
            rB = _mm_sub_pd(rB,rF);

            r0 = _mm_add_pd(r0,rF);
            r1 = _mm_mul_pd(r1,rE);
            r2 = _mm_sub_pd(r2,rD);
            r3 = _mm_mul_pd(r3,rC);
            r4 = _mm_add_pd(r4,rF);
            r5 = _mm_mul_pd(r5,rE);
            r6 = _mm_sub_pd(r6,rD);
            r7 = _mm_mul_pd(r7,rC);
            r8 = _mm_add_pd(r8,rF);
            r9 = _mm_mul_pd(r9,rE);
            rA = _mm_sub_pd(rA,rD);
            rB = _mm_mul_pd(rB,rC);

            i++;
        }

        //  Need to renormalize to prevent denormal/overflow.
        r0 = _mm_and_pd(r0,MASK);
        r1 = _mm_and_pd(r1,MASK);
        r2 = _mm_and_pd(r2,MASK);
        r3 = _mm_and_pd(r3,MASK);
        r4 = _mm_and_pd(r4,MASK);
        r5 = _mm_and_pd(r5,MASK);
        r6 = _mm_and_pd(r6,MASK);
        r7 = _mm_and_pd(r7,MASK);
        r8 = _mm_and_pd(r8,MASK);
        r9 = _mm_and_pd(r9,MASK);
        rA = _mm_and_pd(rA,MASK);
        rB = _mm_and_pd(rB,MASK);
        r0 = _mm_or_pd(r0,vONE);
        r1 = _mm_or_pd(r1,vONE);
        r2 = _mm_or_pd(r2,vONE);
        r3 = _mm_or_pd(r3,vONE);
        r4 = _mm_or_pd(r4,vONE);
        r5 = _mm_or_pd(r5,vONE);
        r6 = _mm_or_pd(r6,vONE);
        r7 = _mm_or_pd(r7,vONE);
        r8 = _mm_or_pd(r8,vONE);
        r9 = _mm_or_pd(r9,vONE);
        rA = _mm_or_pd(rA,vONE);
        rB = _mm_or_pd(rB,vONE);

        c++;
    }

    r0 = _mm_add_pd(r0,r1);
    r2 = _mm_add_pd(r2,r3);
    r4 = _mm_add_pd(r4,r5);
    r6 = _mm_add_pd(r6,r7);
    r8 = _mm_add_pd(r8,r9);
    rA = _mm_add_pd(rA,rB);

    r0 = _mm_add_pd(r0,r2);
    r4 = _mm_add_pd(r4,r6);
    r8 = _mm_add_pd(r8,rA);

    r0 = _mm_add_pd(r0,r4);
    r0 = _mm_add_pd(r0,r8);


    //  Prevent Dead Code Elimination
    double out = 0;
    __m128d temp = r0;
    out += ((double*)&temp)[0];
    out += ((double*)&temp)[1];

    return out;
}

void test_dp_mac_SSE(int tds,uint64 iterations){

    double *sum = (double*)malloc(tds * sizeof(double));
    double start = omp_get_wtime();

#pragma omp parallel num_threads(tds)
    {
        double ret = test_dp_mac_SSE(1.1,2.1,iterations);
        sum[omp_get_thread_num()] = ret;
    }

    double secs = omp_get_wtime() - start;
    uint64 ops = 48 * 1000 * iterations * tds * 2;
    cout << "Seconds = " << secs << endl;
    cout << "FP Ops  = " << ops << endl;
    cout << "FLOPs   = " << ops / secs << endl;

    double out = 0;
    int c = 0;
    while (c < tds){
        out += sum[c++];
    }

    cout << "sum = " << out << endl;
    cout << endl;

    free(sum);
}

int main(){
    //  (threads, iterations)
    test_dp_mac_SSE(8,10000000);

    system("pause");
}

Output (1 thread, 10000000 iterations) - Compiled with Visual Studio 2010 SP1 - x64 Release:

Seconds = 55.5104
FP Ops  = 960000000000
FLOPs   = 1.7294e+010
sum = 2.22652

The machine is a Core i7 2600K @ 4.4 GHz. Theoretical SSE peak is 4 flops * 4.4 GHz = 17.6 GFlops. This code achieves 17.3 GFlops - not bad.

Output (8 threads, 10000000 iterations) - Compiled with Visual Studio 2010 SP1 - x64 Release:

Seconds = 117.202
FP Ops  = 7680000000000
FLOPs   = 6.55279e+010
sum = 17.8122

Theoretical SSE peak is 4 flops * 4 cores * 4.4 GHz = 70.4 GFlops. Actual is 65.5 GFlops.

Let's take this one step further. AVX...

#include <immintrin.h>
#include <omp.h>
#include <iostream>
using namespace std;

typedef unsigned long long uint64;

double test_dp_mac_AVX(double x,double y,uint64 iterations){
    register __m256d r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,rA,rB,rC,rD,rE,rF;

    //  Generate starting data.
    r0 = _mm256_set1_pd(x);
    r1 = _mm256_set1_pd(y);

    r8 = _mm256_set1_pd(-0.0);

    r2 = _mm256_xor_pd(r0,r8);
    r3 = _mm256_or_pd(r0,r8);
    r4 = _mm256_andnot_pd(r8,r0);
    r5 = _mm256_mul_pd(r1,_mm256_set1_pd(0.37796447300922722721));
    r6 = _mm256_mul_pd(r1,_mm256_set1_pd(0.24253562503633297352));
    r7 = _mm256_mul_pd(r1,_mm256_set1_pd(4.1231056256176605498));
    r8 = _mm256_add_pd(r0,_mm256_set1_pd(0.37796447300922722721));
    r9 = _mm256_add_pd(r1,_mm256_set1_pd(0.24253562503633297352));
    rA = _mm256_sub_pd(r0,_mm256_set1_pd(4.1231056256176605498));
    rB = _mm256_sub_pd(r1,_mm256_set1_pd(4.1231056256176605498));

    rC = _mm256_set1_pd(1.4142135623730950488);
    rD = _mm256_set1_pd(1.7320508075688772935);
    rE = _mm256_set1_pd(0.57735026918962576451);
    rF = _mm256_set1_pd(0.70710678118654752440);

    uint64 iMASK = 0x800fffffffffffffull;
    __m256d MASK = _mm256_set1_pd(*(double*)&iMASK);
    __m256d vONE = _mm256_set1_pd(1.0);

    uint64 c = 0;
    while (c < iterations){
        size_t i = 0;
        while (i < 1000){
            //  Here's the meat - the part that really matters.

            r0 = _mm256_mul_pd(r0,rC);
            r1 = _mm256_add_pd(r1,rD);
            r2 = _mm256_mul_pd(r2,rE);
            r3 = _mm256_sub_pd(r3,rF);
            r4 = _mm256_mul_pd(r4,rC);
            r5 = _mm256_add_pd(r5,rD);
            r6 = _mm256_mul_pd(r6,rE);
            r7 = _mm256_sub_pd(r7,rF);
            r8 = _mm256_mul_pd(r8,rC);
            r9 = _mm256_add_pd(r9,rD);
            rA = _mm256_mul_pd(rA,rE);
            rB = _mm256_sub_pd(rB,rF);

            r0 = _mm256_add_pd(r0,rF);
            r1 = _mm256_mul_pd(r1,rE);
            r2 = _mm256_sub_pd(r2,rD);
            r3 = _mm256_mul_pd(r3,rC);
            r4 = _mm256_add_pd(r4,rF);
            r5 = _mm256_mul_pd(r5,rE);
            r6 = _mm256_sub_pd(r6,rD);
            r7 = _mm256_mul_pd(r7,rC);
            r8 = _mm256_add_pd(r8,rF);
            r9 = _mm256_mul_pd(r9,rE);
            rA = _mm256_sub_pd(rA,rD);
            rB = _mm256_mul_pd(rB,rC);

            r0 = _mm256_mul_pd(r0,rC);
            r1 = _mm256_add_pd(r1,rD);
            r2 = _mm256_mul_pd(r2,rE);
            r3 = _mm256_sub_pd(r3,rF);
            r4 = _mm256_mul_pd(r4,rC);
            r5 = _mm256_add_pd(r5,rD);
            r6 = _mm256_mul_pd(r6,rE);
            r7 = _mm256_sub_pd(r7,rF);
            r8 = _mm256_mul_pd(r8,rC);
            r9 = _mm256_add_pd(r9,rD);
            rA = _mm256_mul_pd(rA,rE);
            rB = _mm256_sub_pd(rB,rF);

            r0 = _mm256_add_pd(r0,rF);
            r1 = _mm256_mul_pd(r1,rE);
            r2 = _mm256_sub_pd(r2,rD);
            r3 = _mm256_mul_pd(r3,rC);
            r4 = _mm256_add_pd(r4,rF);
            r5 = _mm256_mul_pd(r5,rE);
            r6 = _mm256_sub_pd(r6,rD);
            r7 = _mm256_mul_pd(r7,rC);
            r8 = _mm256_add_pd(r8,rF);
            r9 = _mm256_mul_pd(r9,rE);
            rA = _mm256_sub_pd(rA,rD);
            rB = _mm256_mul_pd(rB,rC);

            i++;
        }

        //  Need to renormalize to prevent denormal/overflow.
        r0 = _mm256_and_pd(r0,MASK);
        r1 = _mm256_and_pd(r1,MASK);
        r2 = _mm256_and_pd(r2,MASK);
        r3 = _mm256_and_pd(r3,MASK);
        r4 = _mm256_and_pd(r4,MASK);
        r5 = _mm256_and_pd(r5,MASK);
        r6 = _mm256_and_pd(r6,MASK);
        r7 = _mm256_and_pd(r7,MASK);
        r8 = _mm256_and_pd(r8,MASK);
        r9 = _mm256_and_pd(r9,MASK);
        rA = _mm256_and_pd(rA,MASK);
        rB = _mm256_and_pd(rB,MASK);
        r0 = _mm256_or_pd(r0,vONE);
        r1 = _mm256_or_pd(r1,vONE);
        r2 = _mm256_or_pd(r2,vONE);
        r3 = _mm256_or_pd(r3,vONE);
        r4 = _mm256_or_pd(r4,vONE);
        r5 = _mm256_or_pd(r5,vONE);
        r6 = _mm256_or_pd(r6,vONE);
        r7 = _mm256_or_pd(r7,vONE);
        r8 = _mm256_or_pd(r8,vONE);
        r9 = _mm256_or_pd(r9,vONE);
        rA = _mm256_or_pd(rA,vONE);
        rB = _mm256_or_pd(rB,vONE);

        c++;
    }

    r0 = _mm256_add_pd(r0,r1);
    r2 = _mm256_add_pd(r2,r3);
    r4 = _mm256_add_pd(r4,r5);
    r6 = _mm256_add_pd(r6,r7);
    r8 = _mm256_add_pd(r8,r9);
    rA = _mm256_add_pd(rA,rB);

    r0 = _mm256_add_pd(r0,r2);
    r4 = _mm256_add_pd(r4,r6);
    r8 = _mm256_add_pd(r8,rA);

    r0 = _mm256_add_pd(r0,r4);
    r0 = _mm256_add_pd(r0,r8);

    //  Prevent Dead Code Elimination
    double out = 0;
    __m256d temp = r0;
    out += ((double*)&temp)[0];
    out += ((double*)&temp)[1];
    out += ((double*)&temp)[2];
    out += ((double*)&temp)[3];

    return out;
}

void test_dp_mac_AVX(int tds,uint64 iterations){

    double *sum = (double*)malloc(tds * sizeof(double));
    double start = omp_get_wtime();

#pragma omp parallel num_threads(tds)
    {
        double ret = test_dp_mac_AVX(1.1,2.1,iterations);
        sum[omp_get_thread_num()] = ret;
    }

    double secs = omp_get_wtime() - start;
    uint64 ops = 48 * 1000 * iterations * tds * 4;
    cout << "Seconds = " << secs << endl;
    cout << "FP Ops  = " << ops << endl;
    cout << "FLOPs   = " << ops / secs << endl;

    double out = 0;
    int c = 0;
    while (c < tds){
        out += sum[c++];
    }

    cout << "sum = " << out << endl;
    cout << endl;

    free(sum);
}

int main(){
    //  (threads, iterations)
    test_dp_mac_AVX(8,10000000);

    system("pause");
}

Output (1 thread, 10000000 iterations) - Compiled with Visual Studio 2010 SP1 - x64 Release:

Seconds = 57.4679
FP Ops  = 1920000000000
FLOPs   = 3.34099e+010
sum = 4.45305

Theoretical AVX peak is 8 flops * 4.4 GHz = 35.2 GFlops. Actual is 33.4 GFlops.

Output (8 threads, 10000000 iterations) - Compiled with Visual Studio 2010 SP1 - x64 Release:

Seconds = 111.119
FP Ops  = 15360000000000
FLOPs   = 1.3823e+011
sum = 35.6244

Theoretical AVX peak is 8 flops * 4 cores * 4.4 GHz = 140.8 GFlops. Actual is 138.2 GFlops.

Now for some explanations:

The performance critical part is obviously the 48 instructions inside the inner loop. You'll notice that it's broken into 4 blocks of 12 instructions each. Each of these 12 instructions blocks are completely independent from each other - and take on average 6 cycles to execute.

So there's 12 instructions and 6 cycles between issue-to-use. The latency of multiplication is 5 cycles, so it's just enough to avoid latency stalls.

The normalization step is needed to keep the data from over/underflowing. This is needed since the do-nothing code will slowly increase/decrease the magnitude of the data.

So it's actually possible to do better than this if you just use all zeros and get rid of the normalization step. However, since I wrote the benchmark to measure power consumption and temperature, I had to make sure the flops were on "real" data, rather than zeros - as the execution units may very well have special case-handling for zeros that use less power and produce less heat.

More Results:

Intel Core i7 920 @ 3.5 GHz
Windows 7 Ultimate x64
Visual Studio 2010 SP1 - x64 Release

Threads: 1

Seconds = 72.1116
FP Ops  = 960000000000
FLOPs   = 1.33127e+010
sum = 2.22652

Theoretical SSE Peak: 4 flops * 3.5 GHz = 14.0 GFlops. Actual is 13.3 GFlops.

Threads: 8

Seconds = 149.576
FP Ops  = 7680000000000
FLOPs   = 5.13452e+010
sum = 17.8122

Theoretical SSE Peak: 4 flops * 4 cores * 3.5 GHz = 56.0 GFlops. Actual is 51.3 GFlops.

My processor temps hit 76C on the multi-threaded run! If you runs these, be sure the results aren't affected by CPU throttling.

2 x Intel Xeon X5482 Harpertown @ 3.2 GHz
Ubuntu Linux 10 x64
GCC 4.5.2 x64 - (-O2 -msse3 -fopenmp)

Threads: 1

Seconds = 78.3357
FP Ops  = 960000000000
FLOPs   = 1.22549e+10
sum = 2.22652

Theoretical SSE Peak: 4 flops * 3.2 GHz = 12.8 GFlops. Actual is 12.3 GFlops.

Threads: 8

Seconds = 78.4733
FP Ops  = 7680000000000
FLOPs   = 9.78676e+10
sum = 17.8122

Theoretical SSE Peak: 4 flops * 8 cores * 3.2 GHz = 102.4 GFlops. Actual is 97.9 GFlops.

Motivation for this question

Best Answer

Related Solutions

What does multicore assembly language look like

C++ – How to achieve the theoretical maximum of 4 FLOPs per cycle

Warning:

Let's take this one step further. AVX...

More Results:

Related Topic