I have this ADS6125 adc. In the datasheet it is written that this ADC uses internal decoupling:
- "capacitors on-chip eliminates the need for external decoupling" (p.45)
- "As ADS612X already includes internal decoupling, minimal external decoupling can be used without loss in performance" (p.55)
It says minimal decoupling is enough. But what is minimal?
In my design I am using 3 decoupling caps for each supply pin. Could I get in trouble for using too many decoupling caps?
ADS6125 datasheet:
https://www.ti.com/lit/ds/symlink/ads6125.pdf?ts=1603138441413&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FADS6125
Best Answer
The ADS6125 has an Evaluation Module (EVM), here: https://www.ti.com/tool/ADS6125EVM
This includes a schematic, including recommended bypassing. TI is good like that.