Electronic – From curves to SPICE model

mosfetspice

In the lab I measured the Vgs x Id and Vds x Id curves of a MOSFET transistor (actually, the CD4007 IC that has 3 PMOS and 3 NMOS transistors within).

How would I go into turning this data into a SPICE model? I don't need high accuracy.

I tried writing a VDMOS model for LTspice but it looks like it is more suitable for power MOSFETs.

Best Answer

You could start with a SPICE model of the transistor in a CD4007 and fiddle with the parameters to get it to match your curves.

**************************************************
* Level 1 SPICE Models for the 4007 CMOS chip
**************************************************
* These Level 1 models were extracted from measured results. The
* model attempts to account for the package parasitics. The simulated and
* typical measured device capacitances are as follows:
*
*    NMOS: Cgs = 18pF   Cds = 14pF
*    PMOS: Cgs = 17pF   Cds = 26pF
*
* Gate-to-drain capacitances were not extracted but were adjusted to
* to help fit measured results.

*$
.MODEL CMOSP    PMOS    ( LEVEL   = 1           L=5u    W=100u                
+VTO    = -1.40         KP      = 3.2e-5        GAMMA   = 3.30  
+PHI    = 0.65          LAMBDA  = 9e-2          CBD     = 65e-12
+CBS    = 2e-14         IS      = 1e-15         PB      = 0.87
+CGSO   = 0             CGDO    = 0             CGBO    = 1e-5
+CJ     = 2e-10         MJ      = 0.5           CJSW    = 1e-9
+MJSW   = 0.33          JS      = 1e-8          TOX     = 6.89e-10)
*$
.MODEL CMOSN    NMOS    ( LEVEL   = 1           L=5u    W=20u             
+VTO    = 1.77          Kp      = 2.169e-4      GAMMA   = 4.10  
+PHI    = 0.65          LAMBDA  = 1.5e-2        CBD     = 20e-12
+CBS    = 0             IS      = 1e-15         PB      = 0.87
+CBS    = 2e-14         CGDO    = 88e-8         CGBO    = 0
+CJ     = 2e-10         MJ      = 0.5           CJSW    = 1e-9
+MJSW   = 0.33          JS      = 1e-8          TOX     = 1.265e-10)

**************************************************
* Macro for 4007 IC:
**************************************************
*
* Pinout:
*
*             S4/psub G1,4 D5   S5   G5,2 S2   D2      * 1,2,3 - PMOS
*               _||___||___||___||___||___||___||_     * 4,5,6 - NMOS
*               | 7   6    5    4    3    2    1 |     * All PMOS susbstrates 
*               |                                |       connected to pin 14
*               |                              * |     * All NMOS susbstrates
*               |                                |       connected to pin 7
*               | 8   9    10   11   12   13   14|
*               _  ___  ___  ___  ___  ___  ___  _
*                ||   ||   ||   ||   ||   ||   ||
*                D4   S6   G3,6 S3   D3,6 D1   S1/nsub
*
* General Form of subcircuit call:
*  X1 n1 n2 ... n14 CMOS4007
*
*$
.SUBCKT CMOS4007 1 2 3 4 5 6 7 8 9 10 11 12 13 14
* MOSFET DR GT SRC SUBS MODEL L    W
M1       13 6  14  14   CMOSP L=5u W=100u
M2       1  3  2   14   CMOSP L=5u W=100u
M3       12 10 11  14   CMOSP L=5u W=100u
M4       8  6  7   7    CMOSN L=5u W=20u
M5       5  3  4   7    CMOSN L=5u W=20u
M6       12 10 9   7    CMOSN L=5u W=20u
.ENDS CMOS4007
*

*$
Related Topic