Use a database

Best practice is to manage all of this information outside Altium using its database integration sub-system.

You can link symbols and footprints via a table rather than trying to manage this information inside of a symbol (which is the wrong layer of abstraction) or in a library of symbols (grouping becomes arbitrary and difficult to manage as the library size grows).

Doing it this way means that you never have to mess with internal attributes and double-entry of data.

My approach

I use CircuitHub for library management. It's free and it's trying to be a Wikipedia of parts.

It plugs into Altium (and other tools) and provides linked symbols and footprints via a local database that is sync'd from the web (so you can use it offline).

You can add/edit/manage parts on the website and it automatically (via Dropbox) syncs those changes to your computer where you can use them in Altium (or any other supported tool).

Here is how you setup CircuitHub to work in Altium.

Here are the basics of component management in CircuitHub.

Disclaimer

I helped create CircuitHub, because I got tired of dealing with these kinds of problems in library management.

I assume you are looking for a schematic symbol, and perhaps footprint. If so, you should just make the required symbols yourself - then you will know that it matches the component you are using (and, for the schematic symbol, that it has the pins arranged (and named) in a way that will suit your use.)

I don't trust other people's libraries (even Altium's - I once found an IC symbol that bore no relation to the maker's datasheet!).