Hi there,
I was trying to do something and not sure what I did without knowingly those small green circles along with names has appeared on ever pin of all the components I had in the schematics.
Could you please let me know how to hide/delete them.
Electronic – How to hide/delete the symbol pin types (named as pas/sup) from the eagle schematics
cadcomponentseagleschematics
Related Solutions
"Invoke" command resolves this.
I've got only Eagle 5.11.0 in front of me at the moment. But, this haven't changed in 6.3.0
@ScottSeidman had beat me to the answer, while I was annotating the screenshot.
The Electrical Rule Check executes, depending on the pin direction (specified by the author of the schematic symbol), various checks. It expects for the direction of type Pwr a Sup pin set for this net. Sup is a pin type for power supply outputs for ground and supply symbols.
From the Eagle manual:
"[...] For every Pwr-pin there must be at least one pin with the same name but the direction Sup(a supply pin). There must be one on every sheet. These Sup pins are fetched into the schematic in the form of power supply symbols, and are defined as Devices in a library (see supply*.lbr). These Devices do not have a Package, since they do not represent components. [...]"
Further...
"If there is no supply pin in the supply libraries that fits to your voltage in the schematic, you have to define a new supply pin! Renaming an already existing supply pin is the wrong way and can lead to unexpected results!"
Related Topic
- Electronic – PCB Layout, Functional vs Actual Pin Order
- Electronic – EAGLE – put “symbol” and corresponding “packages” in the “schematics view”
- Electronic – Impact of permanent magnet on component storage
- Electronic – arduino – Kicad Arduino Schematics
- Electronic – How were schematics drawn before CAD
- Electronic – Schematic Question with electronic button
- Electronic – What are the common footprint naming conventions
Best Answer
Simply run the following command in the schematic window:
If you want to view them again:
As is the way with Eagle, you can also do it from the toolbar. Simply click on the visible layers/display button, find layer 93 (
Pins) and hide it by clicking the number so it is no longer blue. Then click OK.