I need to remove and replace the battery inside a tablet computer (a Nuvision TM800W560L, circa 2015-2016).
Between me and the battery lies a flat, flexible PC board style (ribbon?) cable terminated in a (tiny, delicate) connector (the end pictured is a bit more accessible.) A photo is attached/below.
I certainly do not want to damage the connector during cable removal and re-insertion!
What is this type of connector called, and how should it (properly) be disengaged from the cable (so it can be re-engaged later)?
Thank you for any advice!
Best Answer
To unlock this connector, the black part of this connector needs to be rotated upwards. Check in the following pictures for further clarification: