connector
I am having difficulty disconnecting two different connector-types and I am hoping someone can help me either specify which type of connectors this is or just simply how to disconnect them.
Thank you so much in advance for any help, se pictures below:
As @EugeneSh. said, it is most likely a standard 20x2 rectangular 1mm pitch connector.
The female part could be compatible with these:
And the male part could be compatible with these:
Although it's difficult to tell from your picture whether that's raised enough to accept the shroud on the linked part.
This appears to be a Hirose DF20F-20DP-1V(56) this image shows with the pick and place cap in place, however appears to be the one.
Here is a link to the drawing. https://www.hirose.com/product/download/?distributor=digikey&type=2d&lang=en&num=DF20F-20DP-1V(56)
Best Answer
Do not just pull. there are little latches that hold them in place. you need to make sure these are released either with a small flat screwdriver or the right pressure on the housing then pull.