Do you know the manufacturer or model number of the connector shown in this picture? It came on an unidentified brushless DC motor. Contacts shown are receptacles, not pins. The contact pitch is 0.050 inch / 1.27 mm.
Help identifying compact, flat connector found on brushless DC motor
connectoridentification
Related Solutions
It looks like its from the SHF series from SAMTEC -> 2x5 with 1.27mm grid
What do you mean with "not uniformly spaced like in a normal IDC connector"?
Thanks to a comment from Nick Alexeev (above, in comments), I realized that I had managed to check Mouser, Jameco, etc. but neglected to check DigiKey (of all places).
It appears that this part is one of the Molex Easy-On™ 503555 series connectors; specifically the 5035664300. Taking a look at the datasheet, the flex side of the connector also matches the description (staggered contacts).
Thanks for taking a look, folks!
Related Topic
- Electronic – Need help finding the right FFC connector
- Electronic – Help identifying a board edge press-fit contact
- Electronic – Help identifying a possible connector for these unterminated contacts on the HP Stream 14 motherbard
- Electronic – Identify this PCB connector
- Electronic – Help identifying this damaged FFC/FPC connector
Best Answer
I finally asked the right high reliability supplier. The connector was a custom from MinECon . The link below points to similar connectors. Hope this updated answer helps the one other person on Earth who is looking for this type of connector.
http://www.min-e-con.com/s_series.html