flashlpcxpressoschematics
I was looking at the schematic of the LPCXPRESSO LPC1769 board from NXP and I couldn't figure out what they meant by "not mounted" which appears on the left corner of the following picture.
Here's a link to the full pdf document (page 3):
http://www.lpcware.com/system/files/LPCXpressoLPC1769revB.pdf
I'll take a guess though I don't know for sure. The key words here are publication quality and professor. LaTex does a very nice job when used in conjuction with CircuitTikZ. LaTex is very much used for typesetting documents in the university setting.
Yet another symbol for a rail or power supply voltage. According to W5VO it means "This is the symbol for ultra-low voltage CMOS supplies of 1.2V"
Best Answer
Neither the bypass capacitor C34 nor the SPI flash chip U3 has been populated on the board (since they're both inside the dashed box).
The footprints for both are there, and you could add them yourself (look for the designators C34 and U3). Be sure to add the bypass capacitor C34, if it's not already there, should you decide to add the flash chip.