I'm looking for solution how to mount Zigbit ATZB to prototype board without making individual PCB with pin outputs. Do you know any socket adapter with pins spacing like this? Or any other solution for this?
Zigbit ATZB-24-A2 SMD to DIP socket
atmelzigbee
Related Solutions
You likely want something like a Tag-Connect:
They're available in 6 and 10 pin versions, with and without the plastic retaining clips. You can find them at places like Digikey. They are not cheap ($35), but you'd only need to buy a couple to program a ton of boards.
As a side note: I think when you say "jumpers" you really mean "headers". Headers are the pins, jumpers are usually blocks that short pairs of those pins.
So if anyone finds this later, I eventually found the answer on this page. http://www.ladyada.net/make/logshield/design.html
I hope it helps someone.
Best Answer
The question lacks a specification of the prototype boards pin pitch, but I'll give it a shot anyway.
You could use a pitch adapter from the Zigbit ATZB's 1mm pitch to 2.54mm, like this: http://www.proto-advantage.com/store/product_info.php?products_id=3800027