Interconnecting two locations with CISCO ASA 5505, providing VPN access as well as and public access

We have two geographically distant networks locations and are thinking about introducing a new network architecture utilizing two CISCO ASA 5505s. I'm looking for a review and confirmation whether this architecture is achievable with these two CISCO ASA 5505 Firewalls. I want to be sure this equipment matches our requirements before we make the purchase.

The network should look like this:

Location 1                                      public servers (on vmware ESXi 4.x)
==========                                      |     (VLAN 1 — DMZ)
Public access  ----> +----------------+ --------+
Mobile worker  ----> | CISCO ASA 5505 |
Internet       <---- +----------------+ --------+
                       ^                        |
                       |                        private servers (on vmware ESXi 4.x)
                       |                              (VLAN 2)
                       | IPsec tunnel (VLAN 2)
                       |
Location 2             |
==========             v
                     +----------------+
Internet       <---- | CISCO ASA 5505 | --------+ 
                     +----------------+         |
                                                LAN workstations and servers
                                                      (VLAN 2)

In Location 1 we have a bunch of virtualized servers running on a couple of physical machines with vmware ESXi 4.x. Several VMs are accessible from the internet by the public and hence need to be placed in a DMZ. Also, our employees that need remote access shall be able to connect with the CISCO VPN client to Location 1's ASA. The required authentication method is with our Windows-based CA's issued user certificates.

The bundle for Location 1 will be ASA5505-UL-BUN-K9.

In Location 2 we have just workstations and some local servers. However, mobile workers that access Location 1 via VPN need to gain access to machines running in Location 2, so routing from Loc. 1 to Loc. 2 must be configured. VPN access directly to Location 2 is not required, but is nice to have in the future.

The bundle for location 2 will be ASA5505-50-BUN-K9.

Both locations shall be connected by a secure transparent tunnel (e.g. IPsec, AES encryption, pre-shared key most likely).

Particular questions:

1. There is a limit on the number of licensed VPN connections. By default, ASA 5505 has 2 SSL VPNs and 10 “remote access” VPNs. Which of these two limits applies when the CISCO VPN client is used? Note that 10 is enough for us, however 2 isn't.
2. VPN connection limit is floating (=currently used) or named (per-assigned-user)?
3. Is it really possible to utilize certificate-based authentication for VPN connection and will it work with a Windows-based Certification Authority?
4. Are there any viable, more cost-effective alternatives to ASA 5505 for Location 2, providing same security, similar routing capabilities? Integrated WiFi access point is a plus.

Environment:

• Most servers run Windows Server 2008 R2 x64.
• Workstations run Windows 7 x64.
• There's a single Windows domain.
• vmware server 4 or vmware ESXi 4 for virtualization.
• IPv4

Any other hints or recommendations are appreciated. If you find it appropriate, recommend any network equipment from alternative vendors as well.

I'm not a networking expert and haven't worked with CISCO's equipment for a while, so please ask for any clarifications as needed.