Short answer: you can't. Ports below 1024 can be opened only by root. As per comment - well, you can, using CAP_NET_BIND_SERVICE, but that approach, applied to java bin will make any java program to be run with this setting, which is undesirable, if not a security risk.
The long answer: you can redirect connections on port 80 to some other port you can open as normal user.
Run as root:
# iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080
As loopback devices (like localhost) do not use the prerouting rules, if you need to use localhost, etc., add this rule as well (thanks @Francesco):
# iptables -t nat -I OUTPUT -p tcp -d 127.0.0.1 --dport 80 -j REDIRECT --to-ports 8080
NOTE: The above solution is not well suited for multi-user systems, as any user can open port 8080 (or any other high port you decide to use), thus intercepting the traffic. (Credits to CesarB).
EDIT: as per comment question - to delete the above rule:
# iptables -t nat --line-numbers -n -L
This will output something like:
Chain PREROUTING (policy ACCEPT)
num target prot opt source destination
1 REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:8080 redir ports 8088
2 REDIRECT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 redir ports 8080
The rule you are interested in is nr. 2, so to delete it:
# iptables -t nat -D PREROUTING 2
That is not a valid DNS hostname (there is no .home top-level domain). I would recommend sticking with the default "localhost.localdomain 127.0.0.1" unless you have a valid need for others to resolve to your host. At the very least, have someone more experienced with TCP/IP networking come show you the ropes.
For now you should be able to just point your browser to the host by IP address.
Best Answer
Have you installed the Linux Integration Component? SMB should work even without them, but if you're running into issues like you described, it's likely from not having an enlightened Linux install.