I would like to ask for some simple examples showing the uses of <div>
and <span>
.
I've seen them both used to mark a section of a page with an id
or class
, but I'm interested in knowing if there are times when one is preferred over the other.
Html – the difference between HTML tags and
htmltags
Related Solutions
For HTML 4, the answer is technically:
ID and NAME tokens must begin with a letter ([A-Za-z]) and may be followed by any number of letters, digits ([0-9]), hyphens ("-"), underscores ("_"), colons (":"), and periods (".").
HTML 5 is even more permissive, saying only that an id must contain at least one character and may not contain any space characters.
The id attribute is case sensitive in XHTML.
As a purely practical matter, you may want to avoid certain characters. Periods, colons and '#' have special meaning in CSS selectors, so you will have to escape those characters using a backslash in CSS or a double backslash in a selector string passed to jQuery. Think about how often you will have to escape a character in your stylesheets or code before you go crazy with periods and colons in ids.
For example, the HTML declaration <div id="first.name"></div>
is valid. You can select that element in CSS as #first\.name
and in jQuery like so: $('#first\\.name').
But if you forget the backslash, $('#first.name')
, you will have a perfectly valid selector looking for an element with id first
and also having class name
. This is a bug that is easy to overlook. You might be happier in the long run choosing the id first-name
(a hyphen rather than a period), instead.
You can simplify your development tasks by strictly sticking to a naming convention. For example, if you limit yourself entirely to lower-case characters and always separate words with either hyphens or underscores (but not both, pick one and never use the other), then you have an easy-to-remember pattern. You will never wonder "was it firstName
or FirstName
?" because you will always know that you should type first_name
. Prefer camel case? Then limit yourself to that, no hyphens or underscores, and always, consistently use either upper-case or lower-case for the first character, don't mix them.
A now very obscure problem was that at least one browser, Netscape 6, incorrectly treated id attribute values as case-sensitive. That meant that if you had typed id="firstName"
in your HTML (lower-case 'f') and #FirstName { color: red }
in your CSS (upper-case 'F'), that buggy browser would have failed to set the element's color to red. At the time of this edit, April 2015, I hope you aren't being asked to support Netscape 6. Consider this a historical footnote.
2015 update: the flexbox approach
There are two other answers briefly mentioning flexbox; however, that was more than two years ago, and they don't provide any examples. The specification for flexbox has definitely settled now.
Note: Though CSS Flexible Boxes Layout specification is at the Candidate Recommendation stage, not all browsers have implemented it. WebKit implementation must be prefixed with -webkit-; Internet Explorer implements an old version of the spec, prefixed with -ms-; Opera 12.10 implements the latest version of the spec, unprefixed. See the compatibility table on each property for an up-to-date compatibility status.
(taken from https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Flexible_boxes)
All major browsers and IE11+ support Flexbox. For IE 10 or older, you can use the FlexieJS shim.
To check current support you can also see here:
http://caniuse.com/#feat=flexbox
Working example
With flexbox you can easily switch between any of your rows or columns either having fixed dimensions, content-sized dimensions or remaining-space dimensions. In my example I have set the header to snap to its content (as per the OPs question), I've added a footer to show how to add a fixed-height region and then set the content area to fill up the remaining space.
html,
body {
height: 100%;
margin: 0;
}
.box {
display: flex;
flex-flow: column;
height: 100%;
}
.box .row {
border: 1px dotted grey;
}
.box .row.header {
flex: 0 1 auto;
/* The above is shorthand for:
flex-grow: 0,
flex-shrink: 1,
flex-basis: auto
*/
}
.box .row.content {
flex: 1 1 auto;
}
.box .row.footer {
flex: 0 1 40px;
}
<!-- Obviously, you could use HTML5 tags like `header`, `footer` and `section` -->
<div class="box">
<div class="row header">
<p><b>header</b>
<br />
<br />(sized to content)</p>
</div>
<div class="row content">
<p>
<b>content</b>
(fills remaining space)
</p>
</div>
<div class="row footer">
<p><b>footer</b> (fixed height)</p>
</div>
</div>
In the CSS above, the flex property shorthands the flex-grow, flex-shrink, and flex-basis properties to establish the flexibility of the flex items. Mozilla has a good introduction to the flexible boxes model.
Related Topic
htmltags
Related Solutions
For HTML 4, the answer is technically:
ID and NAME tokens must begin with a letter ([A-Za-z]) and may be followed by any number of letters, digits ([0-9]), hyphens ("-"), underscores ("_"), colons (":"), and periods (".").
HTML 5 is even more permissive, saying only that an id must contain at least one character and may not contain any space characters.
The id attribute is case sensitive in XHTML.
As a purely practical matter, you may want to avoid certain characters. Periods, colons and '#' have special meaning in CSS selectors, so you will have to escape those characters using a backslash in CSS or a double backslash in a selector string passed to jQuery. Think about how often you will have to escape a character in your stylesheets or code before you go crazy with periods and colons in ids.
For example, the HTML declaration <div id="first.name"></div>
is valid. You can select that element in CSS as #first\.name
and in jQuery like so: $('#first\\.name').
But if you forget the backslash, $('#first.name')
, you will have a perfectly valid selector looking for an element with id first
and also having class name
. This is a bug that is easy to overlook. You might be happier in the long run choosing the id first-name
(a hyphen rather than a period), instead.
You can simplify your development tasks by strictly sticking to a naming convention. For example, if you limit yourself entirely to lower-case characters and always separate words with either hyphens or underscores (but not both, pick one and never use the other), then you have an easy-to-remember pattern. You will never wonder "was it firstName
or FirstName
?" because you will always know that you should type first_name
. Prefer camel case? Then limit yourself to that, no hyphens or underscores, and always, consistently use either upper-case or lower-case for the first character, don't mix them.
A now very obscure problem was that at least one browser, Netscape 6, incorrectly treated id attribute values as case-sensitive. That meant that if you had typed id="firstName"
in your HTML (lower-case 'f') and #FirstName { color: red }
in your CSS (upper-case 'F'), that buggy browser would have failed to set the element's color to red. At the time of this edit, April 2015, I hope you aren't being asked to support Netscape 6. Consider this a historical footnote.
2015 update: the flexbox approach
There are two other answers briefly mentioning flexbox; however, that was more than two years ago, and they don't provide any examples. The specification for flexbox has definitely settled now.
Note: Though CSS Flexible Boxes Layout specification is at the Candidate Recommendation stage, not all browsers have implemented it. WebKit implementation must be prefixed with -webkit-; Internet Explorer implements an old version of the spec, prefixed with -ms-; Opera 12.10 implements the latest version of the spec, unprefixed. See the compatibility table on each property for an up-to-date compatibility status.
(taken from https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Flexible_boxes)
All major browsers and IE11+ support Flexbox. For IE 10 or older, you can use the FlexieJS shim.
To check current support you can also see here: http://caniuse.com/#feat=flexbox
Working example
With flexbox you can easily switch between any of your rows or columns either having fixed dimensions, content-sized dimensions or remaining-space dimensions. In my example I have set the header to snap to its content (as per the OPs question), I've added a footer to show how to add a fixed-height region and then set the content area to fill up the remaining space.
html,
body {
height: 100%;
margin: 0;
}
.box {
display: flex;
flex-flow: column;
height: 100%;
}
.box .row {
border: 1px dotted grey;
}
.box .row.header {
flex: 0 1 auto;
/* The above is shorthand for:
flex-grow: 0,
flex-shrink: 1,
flex-basis: auto
*/
}
.box .row.content {
flex: 1 1 auto;
}
.box .row.footer {
flex: 0 1 40px;
}
<!-- Obviously, you could use HTML5 tags like `header`, `footer` and `section` -->
<div class="box">
<div class="row header">
<p><b>header</b>
<br />
<br />(sized to content)</p>
</div>
<div class="row content">
<p>
<b>content</b>
(fills remaining space)
</p>
</div>
<div class="row footer">
<p><b>footer</b> (fixed height)</p>
</div>
</div>
In the CSS above, the flex property shorthands the flex-grow, flex-shrink, and flex-basis properties to establish the flexibility of the flex items. Mozilla has a good introduction to the flexible boxes model.
Best Answer
div
is a block elementspan
is an inline element.This means that to use them semantically, divs should be used to wrap sections of a document, while spans should be used to wrap small portions of text, images, etc.
For example:
Note that it is illegal to place a block-level element within an inline element, so:
...is illegal.
EDIT: As of HTML5, some block elements can be placed inside of some inline elements. See the MDN reference here for a pretty clear listing. The above is still illegal, as
<span>
only accepts phrasing content, and<div>
is flow content.You asked for some concrete examples, so is one taken from my bowling website, BowlSK:
Ok, what's going on?
At the top of my page, I have a logical section, the "header". Since this is a section, I use a div (with an appropriate id). Within that, I have a couple of sections: the user bar and the actual page title. The title uses the appropriate tag,h1
. The userbar, being a section, is wrapped in adiv
. Within that, the username is wrapped in aspan
, so that I can change the style. As you can see, I have also wrapped aspan
around 2 letters in the title - this allows me to change their color in my stylesheet.Also note that HTML5 includes a broad new set of elements that define common page structures, such as article, section, nav, etc.
Section 4.4 of the HTML 5 working draft lists them and gives hints as to their usage. HTML5 is still a working spec, so nothing is "final" yet, but it is highly doubtful that any of these elements are going anywhere. There is a javascript hack that you will need to use if you want to style these elements in some older version of IE - You need to create one of each element using
document.createElement
before any of those elements are specified in your source. There are a bunch of libraries that will take care of this for you - a quick Google search turned up html5shiv.