command lineioskeychainsdk
I'm configuring automated build server for iOS application project.
I've done most of it. Now, it's the final round. The security.
Developer certificate/private key and provisioning profile can be easily installed into Keychain with GUI. But I want to do this via command line to automate even the configuring process. Exporting/importing certificates, private keys, provisioning profiles via command line.
Any recommendations will be very appreciated.
I had the same problem: I first downloaded my certificates to my small MacBook while on the run. When trying to install the certificates on my iMac... then I ran into the problems described on this page.
After spending hours pulling my hair out like many of you, I performed the following steps to fix it:
Close all your stuff except your webpage that should be logged into App Dev center.
Open Xcode. Click WINDOW > ORGANIZER. Then click the Devices tab and select "Provisioning Profiles" on the left. That should bring up your provisioning profiles. Highlight one by one (if more than 1), right click and delete profile. Yes, just do it! Delete them all! (I kept making a new one after a new one trying to make the thing work.)
From the first page you see after logging into the App Dev Center on the right side click "iOS PROVISIONING PORTAL" > (do not "launch assistant"). Instead click on the left side. Select CERTIFICATES. You will probably have just one line listed with your name/company - from there click on the right side REVOKE. Click OK to verify that's what you want to do.
On the same page click DEVICES. Click the box next to your device you are trying to provision and click REMOVE SELECTED. Again click OK to verify.
Wait about 2 minutes to let Apple do their thing.
Now click on "HOME" that is on the left side navigation.
Click "Launch Assistant"
create a new app ID - call it whatever you want. Just make sure it's unique enough to know that's the one you just created because the others you've been messing with all day will not be deleted from Apples Dev Center.
You should be able to follow the rest of the Assistant without troubles -- the main thing is you just had to delete your old provision profiles and start over.
Good Luck!
Ahh this is a common issue, The solution is simple:
Who ever created the developer credentials originally needs to go to the keychain on their computer and right click on the key(s) for private and public and export the key to a file. Then you just download that file on your computer and open it, and it will be added to your keychain.
You need to have both the private key (.pem file) and the certificate for your provisioning profiles.
Best Answer
The always allow GUI is being triggered because codesign hasn't been given an acl to access your private key. try this:
The -T flag tells security to allow codesign to have access to the keys you are importing in Certificate.p12.