The name ‘model’ does not exist in current context in MVC3

asp.net-mvc-3razor

I added a cshtml page in an project. When I tried to add the following declaration to it, I get an error: "The name 'model' does not exist in current context".

@model xyz.abc.SomeClass

I checked the references, all of them are in place. I added a web.config in view folder, but that didn't fix it.

Is there anything i am missing?

Best Answer

Update: If you are using a newer version of MVC, the same process applies, just be sure to use the correct version number in the web.config's <host> line.

Well, I found myself experiencing the same thing you did, and after a bit further research, I found out what the problem is!

You need to include the default MVC3 web.config for the Views folder. MVC3 has two: one in the root for your application, and one for the views folder. This has a section for included namespaces. Be sure that yours looks something like this:

  <system.web.webPages.razor>
    <host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
    <pages pageBaseType="System.Web.Mvc.WebViewPage">
      <namespaces>
        <add namespace="System.Web.Mvc" />
        <add namespace="System.Web.Mvc.Ajax" />
        <add namespace="System.Web.Mvc.Html" />
        <add namespace="System.Web.Routing" />
      </namespaces>
    </pages>
  </system.web.webPages.razor>

I suggest that you create a new MVC3 project, then just copy the web.config created for you into your views folder.

Important Once you've done that, you need to close the file and reopen it. Voila! Intellisense!

Related Solutions

Escape @ character in razor view engine

@@ should do it.

The name ‘ViewBag’ does not exist in the current context

I was having the same problem. Turned out I was missing the ./Views/Web.config file, because I created the project from an empty ASP.NET application instead of using an ASP.NET MVC template.

For ASP.NET MVC 5, a vanilla ./Views/Web.config file contains the following:

<?xml version="1.0"?>

<!-- https://stackoverflow.com/a/19899269/178082 -->
<configuration>
    <configSections>
        <sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
            <section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
            <section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
        </sectionGroup>
    </configSections>

    <system.web.webPages.razor>
        <host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
        <pages pageBaseType="System.Web.Mvc.WebViewPage">
            <namespaces>
                <add namespace="System.Web.Mvc" />
                <add namespace="System.Web.Mvc.Ajax" />
                <add namespace="System.Web.Mvc.Html" />
                <add namespace="System.Web.Routing" />
            </namespaces>
        </pages>
    </system.web.webPages.razor>

    <appSettings>
        <add key="webpages:Enabled" value="false" />
    </appSettings>

    <system.web>
        <httpHandlers>
            <add path="*" verb="*" type="System.Web.HttpNotFoundHandler"/>
        </httpHandlers>

        <!--
                Enabling request validation in view pages would cause validation to occur
                after the input has already been processed by the controller. By default
                MVC performs request validation before a controller processes the input.
                To change this behavior apply the ValidateInputAttribute to a
                controller or action.
        -->
        <pages
                validateRequest="false"
                pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
                pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
                userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
            <controls>
                <add assembly="System.Web.Mvc, Version=5.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />
            </controls>
        </pages>
    </system.web>

    <system.webServer>
        <validation validateIntegratedModeConfiguration="false" />

        <handlers>
            <remove name="BlockViewHandler"/>
            <add name="BlockViewHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" />
        </handlers>
    </system.webServer>
</configuration>

Adding a ./Views/Web.config file containing this content fixed this problem for me.

Best Answer

Related Solutions

Escape @ character in razor view engine

The name ‘ViewBag’ does not exist in the current context

Related Topic