TL;DR
A git rebase workflow does not protect you from people who are bad at conflict resolution or people who are used to a SVN workflow, like suggested in Avoiding Git Disasters: A Gory Story. It only makes conflict resolution more tedious for them and makes it harder to recover from bad conflict resolution. Instead, use diff3 so that it's not so difficult in the first place.
Rebase workflow is not better for conflict resolution!
I am very pro-rebase for cleaning up history. However if I ever hit a conflict, I immediately abort the rebase and do a merge instead! It really kills me that people are recommending a rebase workflow as a better alternative to a merge workflow for conflict resolution (which is exactly what this question was about).
If it goes "all to hell" during a merge, it will go "all to hell" during a rebase, and potentially a lot more hell too! Here's why:
Reason #1: Resolve conflicts once, instead of once for each commit
When you rebase instead of merge, you will have to perform conflict resolution up to as many times as you have commits to rebase, for the same conflict!
Real scenario
I branch off of master to refactor a complicated method in a branch. My refactoring work is comprised of 15 commits total as I work to refactor it and get code reviews. Part of my refactoring involves fixing the mixed tabs and spaces that were present in master before. This is necessary, but unfortunately it will conflict with any change made afterward to this method in master. Sure enough, while I'm working on this method, someone makes a simple, legitimate change to the same method in the master branch that should be merged in with my changes.
When it's time to merge my branch back with master, I have two options:
git merge:
I get a conflict. I see the change they made to master and merge it in with (the final product of) my branch. Done.
git rebase:
I get a conflict with my first commit. I resolve the conflict and continue the rebase.
I get a conflict with my second commit. I resolve the conflict and continue the rebase.
I get a conflict with my third commit. I resolve the conflict and continue the rebase.
I get a conflict with my fourth commit. I resolve the conflict and continue the rebase.
I get a conflict with my fifth commit. I resolve the conflict and continue the rebase.
I get a conflict with my sixth commit. I resolve the conflict and continue the rebase.
I get a conflict with my seventh commit. I resolve the conflict and continue the rebase.
I get a conflict with my eighth commit. I resolve the conflict and continue the rebase.
I get a conflict with my ninth commit. I resolve the conflict and continue the rebase.
I get a conflict with my tenth commit. I resolve the conflict and continue the rebase.
I get a conflict with my eleventh commit. I resolve the conflict and continue the rebase.
I get a conflict with my twelfth commit. I resolve the conflict and continue the rebase.
I get a conflict with my thirteenth commit. I resolve the conflict and continue the rebase.
I get a conflict with my fourteenth commit. I resolve the conflict and continue the rebase.
I get a conflict with my fifteenth commit. I resolve the conflict and continue the rebase.
You have got to be kidding me if this is your preferred workflow. All it takes is a whitespace fix that conflicts with one change made on master, and every commit will conflict and must be resolved. And this is a simple scenario with only a whitespace conflict. Heaven forbid you have a real conflict involving major code changes across files and have to resolve that multiple times.
With all the extra conflict resolution you need to do, it just increases the possibility that you will make a mistake. But mistakes are fine in git since you can undo, right? Except of course...
Reason #2: With rebase, there is no undo!
I think we can all agree that conflict resolution can be difficult, and also that some people are very bad at it. It can be very prone to mistakes, which why it's so great that git makes it easy to undo!
When you merge a branch, git creates a merge commit that can be discarded or amended if the conflict resolution goes poorly. Even if you have already pushed the bad merge commit to the public/authoritative repo, you can use git revert
to undo the changes introduced by the merge and redo the merge correctly in a new merge commit.
When you rebase a branch, in the likely event that conflict resolution is done wrong, you're screwed. Every commit now contains the bad merge, and you can't just redo the rebase*. At best, you have to go back and amend each of the affected commits. Not fun.
After a rebase, it's impossible to determine what was originally part of the commits and what was introduced as a result of bad conflict resolution.
*It can be possible to undo a rebase if you can dig the old refs out of git's internal logs, or if you create a third branch that points to the last commit before rebasing.
Take the hell out of conflict resolution: use diff3
Take this conflict for example:
<<<<<<< HEAD
TextMessage.send(:include_timestamp => true)
=======
EmailMessage.send(:include_timestamp => false)
>>>>>>> feature-branch
Looking at the conflict, it's impossible to tell what each branch changed or what its intent was. This is the biggest reason in my opinion why conflict resolution is confusing and hard.
diff3 to the rescue!
git config --global merge.conflictstyle diff3
When you use the diff3, each new conflict will have a 3rd section, the merged common ancestor.
<<<<<<< HEAD
TextMessage.send(:include_timestamp => true)
||||||| merged common ancestor
EmailMessage.send(:include_timestamp => true)
=======
EmailMessage.send(:include_timestamp => false)
>>>>>>> feature-branch
First examine the merged common ancestor. Then compare each side to determine each branch's intent. You can see that HEAD changed EmailMessage to TextMessage. Its intent is to change the class used to TextMessage, passing the same parameters. You can also see that feature-branch's intent is to pass false instead of true for the :include_timestamp option. To merge these changes, combine the intent of both:
TextMessage.send(:include_timestamp => false)
In general:
- Compare the common ancestor with each branch, and determine which branch has the simplest change
- Apply that simple change to the other branch's version of the code, so that it contains both the simpler and the more complex change
- Remove all the sections of conflict code other than the one that you just merged the changes together into
Alternate: Resolve by manually applying the branch's changes
Finally, some conflicts are terrible to understand even with diff3. This happens especially when diff finds lines in common that are not semantically common (eg. both branches happened to have a blank line at the same place!). For example, one branch changes the indentation of the body of a class or reorders similar methods. In these cases, a better resolution strategy can be to examine the change from either side of the merge and manually apply the diff to the other file.
Let's look at how we might resolve a conflict in a scenario where merging origin/feature1
where lib/message.rb
conflicts.
Decide whether our currently checked out branch (HEAD
, or --ours
) or the branch we're merging (origin/feature1
, or --theirs
) is a simpler change to apply. Using diff with triple dot (git diff a...b
) shows the changes that happened on b
since its last divergence from a
, or in other words, compare the common ancestor of a and b with b.
git diff HEAD...origin/feature1 -- lib/message.rb # show the change in feature1
git diff origin/feature1...HEAD -- lib/message.rb # show the change in our branch
Check out the more complicated version of the file. This will remove all conflict markers and use the side you choose.
git checkout --ours -- lib/message.rb # if our branch's change is more complicated
git checkout --theirs -- lib/message.rb # if origin/feature1's change is more complicated
With the complicated change checked out, pull up the diff of the simpler change (see step 1). Apply each change from this diff to the conflicting file.
Best Answer
Solution explorer is for working with solution, that is for development. When you are opening file from Solution explorer, you are opening a part of your project - VS takes into account what assemblies, namespaces etc. should be visible from this file, which gives you intellisense. Furthermore, context menus on Solution explorer are targeted at development process - notice all these "Build", "Rebuild", "Set as start up project" and so on.
When you are viewing your solution in Solution explorer, you see only those parts that are used in source code, I mean compiled files, resources etc. Moreover there might be a situation when you will have file included in the solution, but not included in source control, and the only place where one can see it is in Solution explorer.
Source control explorer on the other hand is for working with source control. It allows you adding and removing files in repository, checking in and checking out, updates etc. It has nothing to do with the development process directly - for example Source control explorer won't give you an opportunity to compile anything. Opening file in Source control explorer opens it as a single file - yes, it is still editable, but it does not now about the context, does not give you intellisense and so on.
When you are viewing your sources in Source control explorer, you are not limited to the individual solution. Imagine the situation when you have also folder with project documents (specs, mockups) in source control. You might not what to include them in your solution, but you still need to control them somehow - update their versions in source control, add new ones and so on. It is not possible while you are in Solution explorer, since you cannot see anything beyond the solution itself. Therefore the only place where you can work with these files is Source control explorer.
To sum up, Solution explorer is for working with source code, that is for development, Source control explorer is for working with repository.